IK Multimedia iLoud MTM MKII - Immersive Bundle (2024)

PRE-ORDER

Call us for an estimated shipping date

Try it out – call ahead to check availability

SEEN IT CHEAPER?

We match Authorised UK dealers

Part-Exchange your DJ equipment

Experience ultra-accurate spatial audio in studios of all sizes with IK Multimedia's immersive bundle, featuring 11x iLoud MTM MKII monitors and 1x ARC Reference Microphone!

The iLoud MTM monitors are ideal for immersive audio setups like Dolby Atmos, offering built-in acoustic correction, point-source performance, and controlled dispersion to reduce acoustic issues. They are compact, easy to mount, and included in the Dolby Audio Room Design Tool (DARDT) for precise installations.

Despite its familiar appearance, the iLoud MTM MKII boasts numerous enhancements that significantly elevate its performance. These upgrades include superior speaker drivers, enhanced off-axis response, improved power efficiency and SPL, increased onboard processing power, advanced DSP, and refined room correction. Also, the iLoud MTM MKII is now compatible with X-Monitor advanced control software, providing users with complete and immersive control over their speakers.

The IK Multimedia iLoud MTM MKII immersive bundle sets a new standard for compact surround sound. Get yours today at Bop DJ!

• Contour section with LF EXTENSION, LF, DESK, MID and HF controls for complete speaker response customisation, beyond what is allowed by the speaker’s rear pushbuttons.
• Assists with the ARC room analysis process
• Room Calibration ON/OFF switch
• Displays in-room frequency responses, before / after the ARC correction
• Switches among virtual monitoring voices to emulate both frequency and phase response of other listening systems
• 4 assignable buttons to quickly recall various voices
• Firmware updates management
• Delay compensation between speakers

The iLoud MTM MKII features a pair of 3.5″ high-performance woofers and one 1″ high-definition, back-chamber loaded tweeter with improved speaker drivers for superior volume and low end, plus improved clarity and articulation in the midrange.

Redesigned custom mid-woofers not only achieve more extension and definition on the low end, but also improve the midrange clarity and articulation.

Thanks to the lighter and stiffer moving mass, MKII's mid-woofers reveals every little detail in the mid range allowing an improved and more critical listening experience that ultimately results in faster and more accurate mixing.

The onboard processing power has almost doubled with respect to the one on the original iLoud MTM.

The speaker now operates at 96 kHz, the entire DSP processing works at higher precision delivering more transparency and resolution, the ARC correction is now directly derived from the Precision series and supports X-Monitor virtual voicing.

iLoud MTM MKII is now compatible with X-Monitor!

X-monitor is an advanced control software for iLoud family speakers that gives the user complete control over all the features of the speaker in a friendly and intuitive interface.

Technical Specifications:

• Type: 2-Way/3-speakers bi-amped, digitally controlled studio monitor
• LF drivers: 2 x 3.5" composite cellulose fibre, custom-made mid-woofers
• HF drivers: 1" low distortion, back chambered silk dome tweeter
• Acoustic design: DSP tuned bass reflex
• Number of amps per speaker: 2
• Amplifiers type: High efficiency Class-D
• Total power: 100 W RMS
• LF power: 70 W RMS
• HF power: 30 W RMS
• Crossover type: Digital, linear phase
• Crossover frequency: 2.8 kHz
• Frequency response: 48 Hz to 28 kHz ± 2 dB, 36 Hz to 32 kHz @ -10 dB
• Phase response: System remains coherent within +/- 15° from 200 Hz to 20 kHz
• Sensitivity at +4 dBu: -6 dBu signal generates a 94 dB SPL @ 1 m
• Sensitivity at -10 dBV: -17 dBu signal generates a 94 dB SPL @ 1 m
• Continuous, long term SPL free field, 1 m distance, one speaker, ANSI-2034 Weighted Pink Noise: 97 dB
• Peak SPL free field, 1 m distance, one speaker, ANSI-2034 Weighted Pink Noise: 110.5 dB
• Peak SPL, half space, 1 m distance, one speaker, ANSI-2034 Weighted Pink Noise: 112.5 dB
• Placement setup: Manual switches for LF Extension, LF trim, HF trim, Desk position
• LF extension switch: Sets -3 dB point of the frequency response at 40, 50, 60 or 80 Hz (LFE)
• LF switch: Low shelf, +2 dB or -3 dB from 100 Hz down
• HF switch: High shelf, +2 dB or -3 dB from 8 kHz up
• Desk switch: -4 dB at 160 Hz and +1 dB at 1.8 kHz
• Calibration: Fully automatic and built-in digital calibration
• Full DSP control
• Total Latency (TOF): 2.44 ms
• Connectors: 1x combo XLR-1/4" TRS balanced input; 1/8" TS ARC microphone input, 1 x USB type-B, AC POWER socket
• Power requirement: 90 to 240 V AC, auto-ranging, 50 or 60 Hz, 120 W max power consumption

Dimensions:

• Size: 264mm/10.39" x 160mm/6.3" x 130mm/5.12"
• Weight (per speaker): 2,5kg/5.5lbs (speaker + foot)

In The Box:

• 11 x iLoud MTM MKII monitor
• Power cords
• ARC™ reference microphone
• ARC Microphone clamp
• USB-B to USB-A cables
• XLR to 1/8” (3.5mm) TS cable
• Tilting stands
• Horizontal support feet
• Locking keys